Foam-Mo Creations

This is an introduction to one of our favorite making materials, Foam-Mo. Foam-Mo is really great for making models of organic stuff, such as plants and animals, whereas regular air-dry clay has the wrong texture. The Hand of Glory, from one of our other posts, was also made out of Foam-Mo.

Please note, this material is provided for informational purposes only and is not a guide on how to create the designs. Please take a look at our disclaimer.

This is what Foam-Mo looks like when it’s packaged. If you want to work with Foam-Mo, you should also get some plastic spray, because without the plastic spray Foam-Mo can disintegrate over time.

Here are some of the small designs that we made. Like we said earlier, Foam-Mo works well with organic stuff. It  is really soft, and moldable, and not sticky at all. You should not add water, because water can damage your creation, causing them to crumble. While working with Foam-Mo, we used some of the same techniques that you would use for regular clay to mold it.

Here are some more animals that we did, two small snakes. Foam-mo can be rolled really thin, but it holds the same risk as air-dry clay when it it thin. As it is very soft, it also might need supports while it is drying. For this project, we had to prop up the heads to prevent drooping.

This is what it looks like after is is sprayed with plastic. Make sure to do multiple layers, and get every part of the clay. Make sure to spray it AFTER the clay has finished drying.

Here is a cat that we sprayed and painted next to one that we didn’t. The cat that didn’t get sprayed looks droopy, and has the wrong texture, due to the fact that we left it unsprayed for over a year, and it started disintegrating.

Here are two projects that we finished spraying and painting. The colors show up pretty bright, even though the plastic spray was black. We did multiple layers for some of them, but I think that the paint worked pretty well. We used acrylic paint, but you can research and find your own paint.